News RSS
AMG Engine Build Cost Guide 2026 — What Does a Forged M156, M177, or M178 Build Cost?
Building a forged AMG engine is a significant investment — and one of the best decisions you can make for a high-power build. But what does it actually cost in 2026? This guide breaks down the market ranges for AMG engine builds so you can budget realistically, understand what drives the price, and avoid surprises. Market Price Ranges (2026) Pricing varies by engine code, build level, and specification. These are general market ranges — not specific YPG pricing. Contact us for an exact quote on your build. Build Level Market Range (USD) What's Included Forged short block $8,000 – $18,000...
M177 vs M178 — What's the Difference Between AMG's 4.0L Twin-Turbo V8 Engines?
Mercedes-AMG uses two versions of its hand-built 4.0-litre twin-turbo V8: the M177 and the M178. They share the same bore, stroke, and hot-inside-V turbo layout — but they are not the same engine and they are not interchangeable. If you are ordering an engine build, turbo kit, or any internal component, you need to know which one you have. This guide explains the differences. Quick Comparison M177 M178 Displacement 3,982 cc (4.0L) 3,982 cc (4.0L) Configuration 90° V8, DOHC, 32-valve 90° V8, DOHC, 32-valve Turbo layout Hot-inside-V Hot-inside-V Oil system Wet sump Dry sump Block casting M177-specific M178-specific Oil pan...
Short Block vs Long Block vs Crate Engine — What's the Difference?
If you are shopping for an AMG engine build, you have probably seen three terms: short block, long block, and crate engine. They describe different levels of engine assembly — and choosing the right one depends on the condition of your current engine, your budget, and your power goals. This guide breaks down exactly what each one includes, when to choose it, and how they compare. Quick Comparison Build Level What's Included You Supply Best For Short Block Block, crankshaft, connecting rods, pistons, bearings, internal seals Cylinder heads, intake, exhaust, turbos, accessories, wiring Healthy heads, bottom end needs rebuild Long...
M178 CNC-Ported Heads — Flow-Matched Cylinder Heads for AMG GT Dry-Sump 4.0L V8
The AMG GT platform demands heads that can flow under sustained high-RPM, high-boost, high-heat conditions — lap after lap. Our M178 CNC-ported heads are flow-bench developed for the dry-sump 4.0L V8, assembled with upgraded valvetrain, and sold as a matched pair. Built at YPG Motorsport in Kuwait, shipped worldwide. What Are CNC-Ported Heads? CNC porting reshapes the intake and exhaust ports using computer-controlled machining to our flow-bench program. Every port is cut to identical runner volumes and matched flow rates across all eight cylinders. On a twin-turbo engine like the M178, ported heads reduce pumping losses, improve turbo spool, and...
M178 Short Block Build — Forged 4.0L Dry-Sump V8 Bottom End for AMG GT, GTS & GTR
The M178 short block gives AMG GT owners a fully forged, race-spec bottom end for their dry-sump 4.0L twin-turbo V8. Built in-house at YPG Motorsport in Kuwait with the same forged rotating assembly that goes into our complete M178 crate engines. Balanced, blueprinted, and ready for your heads and accessories. What Is an M178 Short Block? A short block is the engine's bottom end: block, crankshaft, connecting rods, pistons, bearings, and internal seals. It does not include cylinder heads, turbochargers, the dry-sump oil system, or accessories. You supply your own heads — either your originals or our M178 CNC-ported heads...